For a more detailed technical presentation, click here

Feeder

– Equipped with German design feeding system offered by KBA-MMS
– Whole machine is risen making the maximum pile height up to 1600mm, also equipped with non-stop feeding device
– There are 4 suction cups each lifting paper and 5 other suction cups for moving paper; height and angle of suction heads are easily adjustable.
– The up and down of pile table can be adjusted by double-speed control system which micro-adjustment is available for transversal position of pile table
– Lateral blowing system is adopted to enhance paper separation. To detect double sheet during transportation, we have electronic sensors to do so.
– Optional; 1. pre loader for continuous run. 2. anti static air blowing device for diecutting thin paper or plastic sheets.
– Sheet thickness of 1.5-5mm corrugated board.

Feeder

– Equipped with German design feeding system offered by KBA-MMS
– Whole machine is risen making the maximum pile height up to 1600mm, also equipped with non-stop feeding device
– There are 4 suction cups each lifting paper and 5 other suction cups for moving paper; height and angle of suction heads are easily adjustable.
– The up and down of pile table can be adjusted by double-speed control system which micro-adjustment is available for transversal position of pile table
– Lateral blowing system is adopted to enhance paper separation. To detect double sheet during transportation, we have electronic sensors to do so.
– Optional; 1. pre loader for continuous run. 2. anti static air blowing device for diecutting thin paper or plastic sheets.
– Sheet thickness of 1.5-5mm corrugated board.

Feeding Table

– The pile table can be easily adjusted in all directions by a double speed control system while micro adjustment control.
– A blowing system is provided to enhance paper separation.
– There is an electronic sensor to prevent double sheet feeding.
– The machine is equipped with a device for preventing obstacles from entering the machine.
– Feeding belt provided by HABASIT, Switzerland.
– Single position engagement ensuring the 1st sheet after a re-start always gets fed to the front lays for timesaving and material saving make ready
– The speed of the feeding belt is easily adjustable for perfect sheet control.
– Optional; Thin paper slow down device suitable for any thin paper and high speed diecutting.

Feeding Table

– The pile table can be easily adjusted in all directions by a double speed control system while micro adjustment control.
– A blowing system is provided to enhance paper separation.
– There is an electronic sensor to prevent double sheet feeding.
– The machine is equipped with a device for preventing obstacles from entering the machine.
– Feeding belt provided by HABASIT, Switzerland.
– Single position engagement ensuring the 1st sheet after a re-start always gets fed to the front lays for timesaving and material saving make ready
– The speed of the feeding belt is easily adjustable for perfect sheet control.
– Optional; Thin paper slow down device suitable for any thin paper and high speed diecutting.

Side Lay

– Accurate paper registration is done using two micro adjustable front lays.
– On both sides of the feeding system there are push and pull side lays. The sensitivity of the photo sensors on the side lays and front lays can be adjusted to detect black paper or transparent plastic film.
– The pull and push side guides can be easily changed over by simply turning a bolt. This eliminates the need to remove and replace the complete side guide.

Side Lay

– Accurate paper registration is done using two micro adjustable front lays.
– On both sides of the feeding system there are push and pull side lays. The sensitivity of the photo sensors on the side lays and front lays can be adjusted to detect black paper or transparent plastic film.
– The pull and push side guides can be easily changed over by simply turning a bolt. This eliminates the need to remove and replace the complete side guide.

Diecutting Section

– Cutting chase turn-over device to actualise short set up of repeat jobs
– Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen.
– Pneumatic lock up system on diecutting chase to increase efficiency
– Easy slide in and out of diecutting plate is realised by air floating device
– Centreline system on diecutting chase with transversal micro adjustment ensures accurate registration thus results in quick job changeover

Diecutting Section

– Cutting chase turn-over device to actualise short set up of repeat jobs
– Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen.
– Pneumatic lock up system on diecutting chase to increase efficiency
– Easy slide in and out of diecutting plate is realised by air floating device
– Centreline system on diecutting chase with transversal micro adjustment ensures accurate registration thus results in quick job changeover

Foil Stamping Section

Yoco can tailor-make professional solutions for you, whatever your circumstances. Our design is highly flexible, an easy mix and match can provide you the optimal production solution.

Patented design 2- direction foil feeding system, firstly introduced by Yoco make it possible to stamp the foils in longitudinal and transversal direction at the same time, this helps greatly in saving waste foils as well as the time to change foil. Some products can even be finished at ONE go.

– Maximum foil stamping speed is 6500 sheets per hour.

– Powerful & precise servo motor from OMRON japan capable to handle foil pilling in long distance and at high speed.

Foil Stamping Section

Yoco can tailor-make professional solutions for you, whatever your circumstances. Our design is highly flexible, an easy mix and match can provide you the optimal production solution.

Patented design 2- direction foil feeding system, firstly introduced by Yoco make it possible to stamp the foils in longitudinal and transversal direction at the same time, this helps greatly in saving waste foils as well as the time to change foil. Some products can even be finished at ONE go.

– Maximum foil stamping speed is 6500 sheets per hour.

– Powerful & precise servo motor from OMRON japan capable to handle foil pilling in long distance and at high speed.

– Computerised control and display system and touch screen operation can immediately trace and visualise machine status and possible machine stop causes.
– The servo motor of each roll can be controlled by OMRON PLC to set up 3 different short pulls and long pulls.
– Servo motor control pressure automatically, with auto-drop pressure design when paper out or missing paper.
– Standard with 12 individually controlled heating zones with tolerance +/- 1*c can be optional with 20 heating zones.
– Foil handle can be pulled out from machine, a user-friendly design to change new foil.
– Air blowing foil separation device with separate air tank for quick and sufficient air supply.
– Residual foil length alarm is available

– Optional; hologram device, foil break detector, 3 rollers and 6 rollers foil rewinding unit

– Computerised control and display system and touch screen operation can immediately trace and visualise machine status and possible machine stop causes.
– The servo motor of each roll can be controlled by OMRON PLC to set up 3 different short pulls and long pulls.
– Servo motor control pressure automatically, with auto-drop pressure design when paper out or missing paper.
– Standard with 12 individually controlled heating zones with tolerance +/- 1*c can be optional with 20 heating zones.
– Foil handle can be pulled out from machine, a user-friendly design to change new foil.
– Air blowing foil separation device with separate air tank for quick and sufficient air supply.
– Residual foil length alarm is available

– Optional; hologram device, foil break detector, 3 rollers and 6 rollers foil rewinding unit

Longitudinal Feeding Unit: Horizontal Format

– This is our standard and patent design
– Can handle maximum foil size 250mm in diameter, sufficient space for easy operation.
– The two foil holders can be slid out, so the operator can install the foil outside the machine easily.
– The adjustment of the pressing roller and foil feeding are very easy, the room is bigger, so the operator does not need to climb up on the machine to adjust the rollers.
– All pressing rollers are designed with constant pressure, so the foil is not easy to break.
– The waste foil will be transported by 45* angle bar, waste foil can be controlled by outside rewinding unit.

Longitudinal Feeding Unit: Horizontal Format

– This is our standard and patent design
– Can handle maximum foil size 250mm in diameter, sufficient space for easy operation.
– The two foil holders can be slid out, so the operator can install the foil outside the machine easily.
– The adjustment of the pressing roller and foil feeding are very easy, the room is bigger, so the operator does not need to climb up on the machine to adjust the rollers.
– All pressing rollers are designed with constant pressure, so the foil is not easy to break.
– The waste foil will be transported by 45* angle bar, waste foil can be controlled by outside rewinding unit.

Longitudinal Feeding Unit: Vertical Format

With internal foil rewinding kit
– This is a new design for hot stamping machine with foil rewinding unit inside the machine. The waste foil can be collected in roll tidily inside the machine.
– Vertical format allows the operator to stand inside the machine freely to adjust the pressing unit and foil feeding; the operator can walk inside the machine from the platform.
– The foil holder can be slid out, so the operator can install the machine with the shortest straight line transport distance, so the foil is not easy to break.
– This is an all-in-one compact design. The foil control electronic cabinet and rewinding unit are all inside the machine. The machine is user friendly and space saving. It can handle a maximum foil size of 250mm in diameter.

Longitudinal Feeding Unit: Vertical Format

With internal foil rewinding kit
– This is a new design for hot stamping machine with foil rewinding unit inside the machine. The waste foil can be collected in roll tidily inside the machine.
– Vertical format allows the operator to stand inside the machine freely to adjust the pressing unit and foil feeding; the operator can walk inside the machine from the platform.
– The foil holder can be slid out, so the operator can install the machine with the shortest straight line transport distance, so the foil is not easy to break.
– This is an all-in-one compact design. The foil control electronic cabinet and rewinding unit are all inside the machine. The machine is user friendly and space saving. It can handle a maximum foil size of 250mm in diameter.

LFU Vertical Format & Stripping

– This is an optional design with hot stamping and stripping function changeover. Yoco’s unique design allows you to have stripping function in your hot foil stamping machine without sacrificing the diecutting and stripping capabilities.
– This is a jumbo foil holder can handle the maximum foil size 330mm in diameter. The foil feeding unit can be easily sli out from the machine, allowing space for stripping function. The changeover time for foil stamping and stripping can be finished in 15 minutes.
– Operator can stand inside the machine to adjust the pressure roller and foiling feeder.
– The waste foil will be transported by 45* angle bar, waste foil can be collected by outside rewinding unit.

LFU Vertical Format & Stripping

– This is an optional design with hot stamping and stripping function changeover. Yoco’s unique design allows you to have stripping function in your hot foil stamping machine without sacrificing the diecutting and stripping capabilities.
– This is a jumbo foil holder can handle the maximum foil size 330mm in diameter. The foil feeding unit can be easily sli out from the machine, allowing space for stripping function. The changeover time for foil stamping and stripping can be finished in 15 minutes.
– Operator can stand inside the machine to adjust the pressure roller and foiling feeder.
– The waste foil will be transported by 45* angle bar, waste foil can be collected by outside rewinding unit.

Transversal Foil Feeding Unit

– Maximum foil roll diameter is 200mm.

– The foil rewinding unit and foil unwinding unit are outside the machine so the operator can easily set up the foil rollers and increase the speed of job turnover

– Waste foil rewinding roll is at the operating side so the operator can easily check the stamping quality

– This machine can come with just transversal foil feeding so you can use the stripping section without any changes.

Transversal Foil Feeding Unit

– Maximum foil roll diameter is 200mm.

– The foil rewinding unit and foil unwinding unit are outside the machine so the operator can easily set up the foil rollers and increase the speed of job turnover

– Waste foil rewinding roll is at the operating side so the operator can easily check the stamping quality

– This machine can come with just transversal foil feeding so you can use the stripping section without any changes.

Delivery Section

– With automatic auxiliary belt table can realise nonstop delivery. Maximum pile height up to 1350 mm.
– Safety photo-electric devices prevent over-ascending and over-descending of paper pile
– Lower air blow system suitable for thin paper die cutting.
– Adjustable depressor brush helps unloading paper from grippers and piling up paper.
– Air-controlled rear alignment board switch design, easy to pick finished product sample
– Feeder movement and speed control can be adjusted at the delivery section
– Separate counting device is available.
– Optional; tape inserter, anti-static / thin paper air-blow device.

Delivery Section

– With automatic auxiliary belt table can realise nonstop delivery. Maximum pile height up to 1350 mm.
– Safety photo-electric devices prevent over-ascending and over-descending of paper pile
– Lower air blow system suitable for thin paper die cutting.
– Adjustable depressor brush helps unloading paper from grippers and piling up paper.
– Air-controlled rear alignment board switch design, easy to pick finished product sample
– Feeder movement and speed control can be adjusted at the delivery section
– Separate counting device is available.
– Optional; tape inserter, anti-static / thin paper air-blow device.

Aluminium Supporting Base

– The Aluminum support base is located under the cutting plate to serve as a cushion to reduce noise and to help protect the cutting plate.
– This also extends the life of the cutting plate.
– Accurate position of the cutting chase is controlled by precision photocell sensors along with an automatic chase lock device.
– The cutting chase uses pneumatic lock up system to increase efficiency.
– The cutting plate slides in and out easily using an air floating device alleviating weight.
– The machine has a centerline system on the diecutting chase with transversal micro adjustment to ensure accurate registration resulting in quick job changeover

Aluminium Supporting Base

– The Aluminum support base is located under the cutting plate to serve as a cushion to reduce noise and to help protect the cutting plate.
– This also extends the life of the cutting plate.
– Accurate position of the cutting chase is controlled by precision photocell sensors along with an automatic chase lock device.
– The cutting chase uses pneumatic lock up system to increase efficiency.
– The cutting plate slides in and out easily using an air floating device alleviating weight.
– The machine has a centerline system on the diecutting chase with transversal micro adjustment to ensure accurate registration resulting in quick job changeover

Gripper Bar

– Unique design of gripper bar lock for compensation to ensure accurate paper registration
– All main drive chains are delivered in pairs from Japan and must undergo a special long-run test.

– Optional; quick-lock bar device, oil cooling system.

Gripper Bar

– Unique design of gripper bar lock for compensation to ensure accurate paper registration
– All main drive chains are delivered in pairs from Japan and must undergo a special long-run test.

– Optional; quick-lock bar device, oil cooling system.

Main Drive System

– The patented toggle design contributes to maximum diecutting pressure as 300 tons.
– The required pressure can be easily set up on touch screen, controlled by electrical pressure adjustment system.
– Digital display of pressure data facilitates set up of repeat jobs.
– Adopts automatic centralised lubrication system and automatic main drive chain lubricating system.
– New designed high pressure index drive system with gear drive for gripper bar positioning control.

Main Drive System

– The patented toggle design contributes to maximum diecutting pressure as 300 tons.
– The required pressure can be easily set up on touch screen, controlled by electrical pressure adjustment system.
– Digital display of pressure data facilitates set up of repeat jobs.
– Adopts automatic centralised lubrication system and automatic main drive chain lubricating system.
– New designed high pressure index drive system with gear drive for gripper bar positioning control.

Main Motor

– Inverter-controlled main motor contributes to maximum speed 7500 sph
– Overload protection device with torque limiter for the highest safety operator and equipment
– Equipped with reliable brake air clutch imported from Europe

Main Motor

– Inverter- controlled main motor contributes to maximum speed 7500 sph
– Overload protection device with torque limiter for the highest safety operator and equipment
– Equipped with reliable brake air clutch imported from Europe

Electronics

– Omron PLC and Schneider inverter for motor control
– All electronic components are CE standard
– Computerised control display and 3D touch screen operation can immediately trace and visualise machine status and possible machine stop causes.

Electronics

– Omron PLC and Schneider inverter for motor control
– All electronic components are CE standard
– Computerised control display and 3D touch screen operation can immediately trace and visualise machine status and possible machine stop causes.

Gripper Finger

– Aluminium gripper bar and positioning system, gripper plate is 1 piece design

– Gripper bars with grippers made of lightweight and durable aluminium alloy with ultra-hard coat and anodized finish ensures accurate and consistent paper registration

Gripper Finger

– Aluminium gripper bar and positioning system, gripper plate is 1 piece design

– Gripper bars with grippers made of lightweight and durable aluminium alloy with ultra-hard coat and anodized finish ensures accurate and consistent paper registration

JY106T vertical format

JY-106T