For a more detailed technical presentation, click here

Feeding Section

– 3 Sub headings; Standard roller type, Standard with feeding table, Belt type with pushing claws
– Equipped with reliable paper feeding, front lay and double-sheet sensor
– Paper load down pressing plate can be adjusted according to paper deform to ensure smooth feeding
– Pneumatic side push guide plate at drive side
– There is a vacuum pump under the lead edge feeder, the sheet is sucked onto the table and delivered into the diecutting table.
– Sheet thickness of 1-9mm corrugated board.

Feeding Section

– 3 Sub headings; Standard roller type, Standard with feeding table, Belt type with pushing claws
– Equipped with reliable paper feeding, front lay and double-sheet sensor
– Paper load down pressing plate can be adjusted according to paper deform to ensure smooth feeding
– Pneumatic side push guide plate at drive side
– There is a vacuum pump under the lead edge feeder, the sheet is sucked onto the table and delivered into the diecutting table.
– Sheet thickness of 1-9mm corrugated board.

Feeding Table

– Adopts an advanced servo drive controlled slow down device for perfect front edge registration. This device slows the substrate down right at the last moment before presenting it to the front lays. This prevents crushing of the substrate.
– Motorised left and right push lays to accommodate different styles of printing registration
– Advanced design of side lay to achieve high accuracy, micro adjustment is available.
– Habasit belts for smooth feeding.
– Adjustable rubber wheel and brush to ensure precise positioning to achieve registration at front and side lay.
– Wheel and brush frame removal is aided with pneumatic cylinder for ease of operation.

Feeding Table

– Adopts an advanced servo drive controlled slow down device for perfect front edge registration. This device slows the substrate down right at the last moment before presenting it to the front lays. This prevents crushing of the substrate.
– Motorised left and right push lays to accommodate different styles of printing registration
– Advanced design of side lay to achieve high accuracy, micro adjustment is available.
– Habasit belts for smooth feeding.
– Adjustable rubber wheel and brush to ensure precise positioning to achieve registration at front and side lay.
– Wheel and brush frame removal is aided with pneumatic cylinder for ease of operation.

Diecutting Section

– Toggle design contributes to maximum diecutting pressure at 400 tons. The pressure can be easily set up on touch screen, controlled by electrical pressure adjustment system. Digital display of pressure data facilitates set up of repeat jobs
– Computerized control display system and 3D touch screen operation can immediately trace and visualize machine status and possible machine stop causes
– Pneumatic lock-up system on diecutting chase to increase efficiency
– Centerline system on diecutting chase ensures accurate registration
– Pre make ready table available to pre set repeat work / reduce down time.

Diecutting Section

– Toggle design contributes to maximum diecutting pressure at 400 tons. The pressure can be easily set up on touch screen, controlled by electrical pressure adjustment system. Digital display of pressure data facilitates set up of repeat jobs
– Computerized control display system and 3D touch screen operation can immediately trace and visualize machine status and possible machine stop causes
– Pneumatic lock-up system on diecutting chase to increase efficiency
– Centerline system on diecutting chase ensures accurate registration
– Pre make ready table available to pre set repeat work / reduce down time.

Stripping Section

– Double action stripping section / upper and lower stripping frames facilitates die change motorised upper frame

– Centreline registration system to match diecutting section giving accurate positioning to increase efficiency and minimalise changeover time.

– Front edge grip removal system again giving higher production efficiency.

Stripping Section

– Double action stripping section / upper and lower stripping frames facilitates die change motorised upper frame

– Centreline registration system to match diecutting section giving accurate positioning to increase efficiency and minimalise changeover time.

– Front edge grip removal system again giving higher production efficiency.

Delivery Section

– Independent conveyor rolled delivery table is used for lead edge feeder.
– Electronic batch counter
– Adopts Japanese design, non stop delivery system with motorised automatic delivery rack to effectively avoid scratches on the product
– Safety photo sensors to prevent overloading of pile.
– Adjustable depressor brush aids delivery of product from grippers and also aids neater stack

Delivery Section

– Independent conveyor rolled delivery table is used for lead edge feeder.
– Electronic batch counter
– Adopts Japanese design, non stop delivery system with motorised automatic delivery rack to effectively avoid scratches on the product
– Safety photo sensors to prevent overloading of pile.
– Adjustable depressor brush aids delivery of product from grippers and also aids neater stack

Main Chain & Gripper Bars

– Lightweight and durable aluminium 8 piece gripper bars with ultra hard coat and anodized finish ensures accurate and constant registration

– Gripper bar chain is imported from Reynold, UK.

– Automatic centralised lubricating system and automatic main drive chain lubricating system

Main Chain & Gripper Bars

– Lightweight and durable aluminium 8 piece gripper bars with ultra hard coat and anodized finish ensures accurate and constant registration

– Gripper bar chain is imported from Renold, UK.

– Automatic centralised lubricating system and automatic main drive chain lubricating system

Main Body

– Inverter controlled main motor giving a maximum speed of 5000 sheets per hour.

– Computerised control system and 3D touch screen can immediately trace and show machines status providing fast fault finding.

– Equipped with 3 cam index box device and overload protecting clutch for perfect registration.

Main Body

– Inverter controlled main motor giving a maximum speed of 5000 sheets per hour.

– Computerised control system and 3D touch screen can immediately trace and show machines status providing fast fault finding.

– Equipped with 3 cam index box device and overload protecting clutch for perfect registration.

Electronics

Electrical components are all off the shelf global brands.

– Siemens
– Omron sensors
– Mitsubishi PLC

Electronics

Electrical components are all off the shelf global brands.

– Siemens
– Omron sensors
– Mitsubishi PLC

1650 LEAD EDGE FEEDER

Yoco JY 1650 – Lead Edge Feeder

PRESSE A PLATINE AUTOMATIQUE NIKKO JY - TOUTIN SERVICE

Introductory Video to Yoco