YOCO JY-106EB Blanking — Diecut Global

YOCO JY-106EB Blanking
Features

Machine comes equipped with German designed MMS feeding system supplied by Mabeg Machinery Shanghai Co Ltd.
The height of the machine has been made taller to provide a pile height of 1600mm
The machine is equipped with a non stop feeding device.
There are 4 suction cups for lifting paper and 5 suction cups for moving the paper.
The height and angle of the suction cups are easily adjustable to accommodate all grades of board from flat to warped.
Optional; 1. pre loader for continuous run. 2. anti static air blowing device for diecutting thin paper or plastic sheets.
Sheet thickness of 1.5-5mm corrugated board.

The pile table can be easily adjusted in all directions by a double speed control system while micro adjustment control.
A blowing system is provided to enhance paper separation.
There is an electronic sensor to prevent double sheet feeding.
The machine is equipped with a device for preventing obstacles from entering the machine.
Feeding belt provided by HABASIT, Switzerland.
Single position engagement ensuring the 1st sheet after a re-start always gets fed to the front lays for timesaving and material saving make ready
Optional; Thin paper slow down device suitable for any thin paper and high speed diecutting.

Stripping and Single Station Blanking Section
The machine can easily be changed over from normal striping functions to blanking functions.
The carton can be blanked and piled correctly with a paper inserter option also available.
The stripping section consists of an upper and lower frame. A male and female stripping die can also be used.
Tooling is fixed into position using a centerline system throughout the machine.
The blanking system is also equipped with a pile table and a non stop automatic auxiliary delivery belt.

With automatic auxiliary belt table can realise nonstop delivery. Maximum pile height up to 1350 mm.
– Safety photo-electric devices prevent over-ascending and over-descending of paper pile
Lower air blow system suitable for thin paper diecutting.
Adjustable depressor brush helps unloading paper from grippers and piling up paper.
Air-controlled rear alignment board switch design, easy to pick finished product sample
Feeder movement and speed control can be adjusted at the delivery section
Separate counting device is available.
Optional; tape inserter, anti-static / thin paper air-blow device.