YOCO JY-1450 — Diecut Global

YOCO JY-1450
Features

Equipped with German design feeding system offered by MMS Mabeg Machinery Shanghai Co Ltd
Whole machine is risen making the maximum pile height up to 1400mm, also equipped with non-stop feeding device
There are 4 suction cups each lifting paper and 5 other suction cups for moving paper; height and angle of suction heads are easily adjustable.
The up and down of pile table can be adjusted by double-speed control system which micro-adjustment is available for transversal position of pile table
Lateral blowing system is adopted to enhance paper separation. To detect double sheet during transportation, we have electronic sensors to do so.
The installation of anti-obstacle device on the feeding section is to prevent obstacles from entering into the machine which may cause damages to the machine.
Optional; 1. pre loader for continuous run. 2. anti static air blowing device for diecutting thin paper or plastic sheets.
Sheet thickness of 1.5-5mm corrugated board.

With automatic auxiliary belt table can realise nonstop delivery. Maximum pile height up to 1145 mm.
Safety photo-electric devices prevent over-ascending and over-descending of paper pile
Lower air blow system suitable for thin paper diecutting.
Adjustable depressor brush helps unloading paper from grippers and piling up paper.
Air-controlled rear alignment board switch design, easy to pick finished product sample
Feeder movement and speed control can be adjusted at the delivery section
Separate counting device is available.
Optional; tape inserter, anti-static / thin paper air-blow device.